1. X-ray machines, also known as X-RAY inspection equipment, are industrial devices used for non-destructive testing. They are commonly employed for inspecting various industrial components, electronic parts, and internal circuits without causing damage.
2. PCB boards are typically inspected manually using magnifying glasses or calibrated microscopes. This visual inspection method, performed by the operator, assesses whether the circuit board meets quality standards and determines when corrective actions are necessary. This is the most traditional form of inspection.
3. The main advantages of manual inspection are its lower initial cost and the lack of need for specialized test fixtures. However, the disadvantages include subjective human error, high long-term costs, discontinuous defect detection, and challenges in data collection. With the increase in PCB production and the shrinking size of wire spacing and components,
Are there specific aspects of the X-ray inspection process you want to focus on or improve in this article?
2. PCB boards are typically inspected manually using magnifying glasses or calibrated microscopes. This visual inspection method, performed by the operator, assesses whether the circuit board meets quality standards and determines when corrective actions are necessary. This is the most traditional form of inspection.
3. The main advantages of manual inspection are its lower initial cost and the lack of need for specialized test fixtures. However, the disadvantages include subjective human error, high long-term costs, discontinuous defect detection, and challenges in data collection. With the increase in PCB production and the shrinking size of wire spacing and components,
Are there specific aspects of the X-ray inspection process you want to focus on or improve in this article?
