Generating Gerber Files from CircuitMaker 2.2.1.6

To export Gerber files from CircuitMaker for PCB manufacturing, follow these steps:

• Step 1: Access “Outputs” and choose “Gerber”
• Step 2: Configure the default settings
• Step 3: Name the Gerber files correctly

Make sure to name each layer according to the following conventions:

• pcbname.GTL – Top Copper
• pcbname.GTS – Top Soldermask
• pcbname.GTO – Top Silkscreen
• pcbname.GBL – Bottom Copper
• pcbname.GBS – Bottom Soldermask
• pcbname.GBO – Bottom Silkscreen
• pcbname.TXT – Drill Files
• pcbname.GML/GKO – Board Outline
• pcbname.GL2 – Inner Layer 2 (for ≥4 layer PCBs)
• pcbname.GL3 – Inner Layer 3 (for ≥4 layer PCBs)

Note: Choose either GML, GKO, or the outline layer to define the PCB outline for clarity.

• Step 4: Review and confirm the default settings
• Step 5: Click “OK” to create the Gerber zip file
• Step 6: Export NC Drill Files
• Step 7: Finalize the NC drill files export by clicking “OK”
• Step 8: Merge Gerber and Drill Files into a single Zip File

Combine the files from “NC_Drill.zip” into “Gerber.zip” to create a unified file.

• Step 9: Verify the combined Gerber and Drill Files

The final zip file should include all necessary information for PCB manufacturing.

• Step 10: Order Placement

Once the files are prepared, proceed to place an online order on our PCB Instant Order page.

If you have inquiries regarding PCB design or manufacturing, feel free to contact us via email at info@wellcircuits.com.