Basic Principles of Printed Circuit Board:
(1) The distance between the two associated lead ends should not be too large, generally about 2 to 3/10 inches is more appropriate.
(2) The inlet and outlet ends should be concentrated on one or two sides as much as possible, and should not be too discrete.
(6) Pay attention to the pin arrangement sequence when designing the wiring diagram, and the component pin spacing should be reasonable.
(10) The design should be carried out in a certain order, for example, from left to right and from top to bottom.
(1) The distance between the two associated lead ends should not be too large, generally about 2 to 3/10 inches is more appropriate.
(2) The inlet and outlet ends should be concentrated on one or two sides as much as possible, and should not be too discrete.
(6) Pay attention to the pin arrangement sequence when designing the wiring diagram, and the component pin spacing should be reasonable.
(10) The design should be carried out in a certain order, for example, from left to right and from top to bottom.
